We now have insurance to teach wind turbine building workshops anywhere in Europe. So if you live in a nice windy place and want to make a wind turbine then organize a workshop with our help and we will come and do it for you. If your place is nice and sunny that would be good as we did not see a lot of sunshine here in Ireland this summer 🙂
A Wind Turbine Recipe Book (2011 Metric edition) by Hugh Piggott
This is the latest edition of Hugh Piggotts ‘axial flux windmill plans’ as used in the courses we teach.
The Recipe Book replaces his older plans ‘How to Build a Wind Turbine’ (2005).
On each of our workshops we build one wind turbine to a design by Hugh Piggott of Scoraigwind.
The turbines come in six different sizes of blade diameter.
|Turbine diameter mm
|Mean wind speed 3 m/s
||12 kWh||22 kWh||34 kWh||49 kWh||67 kWh|
|Mean wind speed 4 m/s||14 kWh||30 kWh||54 kWh||85 kWh||122 kWh||166 kWh|
|Mean wind speed 5 m/s||23 kWh||53 kWh||93 kWh||146 kWh||210 kWh||286 kWh|
|Mean wind speed 6 m/s||33 kWh||74 kWh||131 kWh||205 kWh||296 kWh||402 kWh|
|Mean wind speed 7 m/s||41 kWh||92 kWh||164 kWh||256 kWh||369 kWh||502 kWh|
Estimated monthly energy production at different mean windspeeds in meters per second.
Making a wind turbine is not as difficult as you might have imagined. These turbines are designed to be built using fairly basic tools & equipment and the skills needed are taught on the workshop. All tools are supplied during the workshop so there is no need to bring your own tools unless you wish to.
The blades are hand carved from wood to a precise aerodynamic design (not as hard as it sounds).
The alternator is made from Neodymium magnets and enamelled copper wire encased in resin.
And the frame that holds it all together is made from welded steel.
Each day, a modest amount of theoretical introduction will lead to workshop sessions with opportunities to gain hands-on experience of carving wooden blades, winding coils and fitting magnets into purpose built alternators, wiring, fabrication and all aspects which can be covered as time allows.
These courses are to teach you how to build a windturbine, so please do not expect that you will go home with a completed windturbine.
Before you phone or email or sign up for a workshop please have a good look around the website, there are lots of photos and some videos.
Also visit Hugh’s website and learn as much as you can.
Being Aired on Friday 23rd January
RTE TV “Nationwide” contacted us about our successful week-long course with Hugh Piggott in September. To film our grass-roots work for a new ecological feature starting Jan/Feb 2009. Niall Martin (Producer) and Enda O’Brien (Camera) were so professional that everyone relaxed within a few minutes and filming went pretty smoothly.
Crann Og Turbine