I went from almost zero wind to gal winds for this area,
so i got to see what my 2 stator wired in wyes could do.
amps are calibrated with a 100 amp meter , rpm is a 100 pulse encoder and it was calibrated on my lathe from 70 to 1700 rpms, the wind encoder is 100 pulse but i have not calibrated it yet but it close.
24 volt system
4.74 amps , 110 watts , 50 rpms , 5.5 mph , 2.5 m/s
28.4 amps , 682 watts , 186 rpms , 35 mph , 16 m/s
i think my blades are starting to stall at around 20 mph 9 m/s
and i see it furl at 25 mph 11.5 m/s